Tabla de contenido
3.
Remove the 2off pozi head screws (M5x30) and remove the cover strip.
4.
Remove 2off pozi head screws (M5x30), unlock and remove the rear door.
5.
Remove the 2off hex head screws (M10x130), spring washers and square
flat washers.
6.
Lift the Monitor approx 10cm from the monitor base and then move it
forwards or backwards clear of the monitor base.
Note:
When placing the monitor on to the floor or replacing on to the monitor
base, take care not to trap hands or fingers.
Page 58
Tabla de contenido
