Tabla de contenido
5-1 Fitting the Header Assembly
The Header Assembly has a forward centre of gravity, so it is important that at
least two people are used to fit or remove the Header Assembly.
The fitting position of the Header Assembly is very high, and it is important
that a means of reaching the height safely, without stretching, is available.
(e.g. steps, step stool etc.)
1.
Place the header on to the monitor cabinet and slide it forwards so that it
engages under the fixing brackets at the front.
2.
Connect the connector.
3.
Retain the header in position with 2off pozi head screws (M6x30)
Page 36
Tabla de contenido
