Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English / USA
2
1
1
1
:
Undo the nuts (1)
:
Turn the tensioning nut (2)
anticlockwise with the combination
wrench – approx. 1/4 turn, up to the
stop "0"
2
1
:
Unscrew the bolt (1)
:
Raise the V-belt guard (2) slightly
and pull it off to the front
:
Remove the ribbed V-belt from the
front pulley
26
0
1
:
Remove the nuts (1)
:
Remove the starter cover (2)
:
Remove the cast arm (3) and guard
from the studs
3
1
2
1
1
2
1
1
2
2
3
4
:
Press the oblong holes (1) in the
cast arm and guard on to the
studs (2), guiding the ribbed V-belt
over the front pulley
The belt action must run smoothly.
:
The belt tensioner (3) must sit close
to the lug (4)
TS 410, TS 420
Capítulos
Tabla de contenido
