Instruction Manual
13. Assembling and using the suction filter.
- This pressure washer has a system that allows
you to draw water from a tank or cistern. To do
that, use a 1/2" diameter hose, maximum 7.5 m
length and attach the water suction filter to the
end of the hose.
ATTENTION: never draw water from a tank
or cistern without using the filter. Do not draw
water from great depths. Maximum difference
in water level: 0.5 m.
14. Remove air trapped in the hose.
- Always remove all the air trapped in the hose
before running the machine.
- Run the faucet or water supply register with
the pressure washer off and press the trigger
until all the air has come out.
NOTE: never run the pressure washer with air
in the hoses, which can damage the motor.
15. Switching the machine on.
- Check the mains voltage and insert the plug
into the power outlet.
- To switch the pressure washer on, switch the
button to the right, to the "ON" position. To
switch it off, switch the button to the left, to the
"OFF" position.
42554 - High-pressure Washer 2100 psi
25