Instruction Manual
6. Assembling the water connector and filter.
- Insert the filter into the water inlet connector
and twist the connector to securely attach it to
the pressure washer.
- Inspect the filter regularly for dirt and remove
it to clean when necessary.
NOTE: never use the pressure washer without
the filter.
7. Positioning the pressure washer.
- Always position the pressure washer on a
smooth, stable surface. This will prevent the
appliance from toppling or sliding accidentally.
8. Installing the wand and nozzle.
- Hold the wand and nozzle firmly, attach the
wand to the gun, press down and twist to the left
at the same time until it clicks into place.
9. Adjusting the direction of the water jet.
- This high pressure washer is equipped with a
device to adjust the direction of the water fan.
To adjust the direction of the water fan, release
the gun lock button (1) by pushing it forward,
turn the tip to the desired position and pull the
lock button back.
10. Connecting the gun to the high-pressure
hose.
- Connect the gun to the high-pressure hose.
The gun has a quick-connect coupling system.
Just slide it towards the gun.
42554 - High-pressure Washer 2100 psi
23