- To remove the hose, press the unlock button
(1) and remove the hose.
11. Connecting the high-pressure hose to the
washer.
- Connect the high-pressure hose to the
washer. The pressure washer also has a quick-
connect coupling system. Just slide it towards
the machine.
- To remove the hose, push the unlock button to
the left (1) and remove the hose.
24
42554 - High-pressure Washer 2100 psi
Instruction Manual
12. Connecting the water supply hose.
- Use a 1/2" hose, at least 7.5 m in length.
-
Please
observe
regulations (regarding water consumption rate,
refer to the equipment specifications).
- Connect the water supply hose to the network.
- Attach a quick-connect coupling to the hose.
- Connect the coupling to the pressure washer
by pulling the lock back and pressing it towards
the machine.
- After connecting the coupling, check if it is
firmly attached so it will not come loose during
operation.
your
water
supplier's