Optional Accessories - Makita DTL062 Manual De Instrucciones

Ocultar thumbs Ver también para DTL062:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

N m
(ft lbs)
50
(36)
40
(29)
30
(22)
M8(5/16")
20
(15)
10
(8)
0
0
1
Fastening time
008501
N m
(ft lbs)
40
(29)
30
(22)
20
(15)
10
(8)
0
0
Fastening time
008502
NOTE:
Hold the tool pointed straight at the bolt or nut.
Excessive fastening torque may damage the
bolt/nut or socket. Before starting your job, always
perform a test operation to determine the proper
fastening time for your bolt or nut.
If the tool is operated continuously until the battery
cartridge has discharged, allow the tool to rest for 15
minutes before proceeding with a fresh battery cartridge.
The fastening torque is affected by a wide variety of
factors including the following. After fastening, always
check the torque with a torque wrench.
1.
When the battery cartridge is discharged almost
completely, voltage will drop and the fastening
torque will be reduced.
2.
Socket
Failure to use the correct size socket will cause
a reduction in the fastening torque.
A worn socket (wear on the hex end or square end)
will cause a reduction in the fastening torque.
Standard bolt
M12(1/2")
(M12(1/2"))
M10(3/8")
(M10(3/8"))
(M8(5/16"))
2
3
(S)
High tensile bolt
M8(5/16")
(M8(5/16"))
M6(1/4")
(M6(1/4"))
1
2
3
(S)
3.
Bolt
Even though the torque coefficient and the
class of bolt are the same, the proper fastening
torque will differ according to the diameter of
bolt.
Even though the diameters of bolts are the
same, the proper fastening torque will differ
according to the torque coefficient, the class of
bolt and the bolt length.
4.
The use of the universal joint or the extension bar
somewhat reduces the fastening force of the
impact wrench. Compensate by fastening for a
longer period of time.
5.
The manner of holding the tool or the material of
driving position to be fastened will affect the
torque.
6.
Operating the tool at low speed will cause a
reduction in the fastening torque.
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and the
battery cartridge is removed before attempting to
perform inspection or maintenance.
Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may
result.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
These
accessories
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Sockets
Extension bar
Universal joint
Bit adapter
Makita genuine battery and charger
NOTE:
Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.
8
or
attachments
Only use
accessory or
are
Tabla de contenido
loading

Este manual también es adecuado para:

Dtl063

Tabla de contenido