Self Clean
WA8600M_WA52M8650A_DC68-03774C_EN.indd 49
Self Clean is a self-cleaning cycle that
removes mold that may occur inside the
washer.
1. Press Power.
2. Select Self Clean.
Once Self Clean is selected, the only
function that can be set is Delay End.
3. Press Start/Pause. Self.
CAUTION
• Using Self Clean, you can clean the drum
without using a cleansing agent.
• Never use Self Clean when laundry is
in the washer. This may cause damage
to the laundry or a problem with the
washer.
NOTE
The Self Clean Auto Led Function
• If the "Self Clean" led is lit after a
wash, it led that tub (drum) cleaning
is required. In this case, remove the
laundry from the washing machine, turn
the power on, and clean the drum by
running Self Clean.
• If you do not run Self Clean, the "Self
Clean" led turns off. However, the "Self
Clean" led will light again after five
washes. Not running Self Clean at this
point will not cause a problem with the
washing machine.
• Although the Self Clean Auto led appears
once a month or so, the frequency may
differ depending on the number of times
the washing machine is used.
English 49
2016-12-23
2:55:28