To Use The Battery Pack; Para El Uso De La Batería - Samsung VP-W90 Manual De Instrucciones

Tabla de contenido
ENGLISH
Preparing

To use the Battery Pack

How long will the battery last for recording?
✤ Depends on how often you are likely to use the zoom
feature during recording.
Recharging the Battery Pack
1. Attach the battery pack to the
camcorder.
2. Connect the AC Power
Adapter to a AC cord and
plug the AC cord into a wall
socket.
3. Connect the DC cable to
the camcorder.
4. Turn the power off on the
camcorder, and the recharging
indicator will start flashing,
indicating the battery is
charging.
- Flashing once a second :
the battery is less
than 50% charged.
- Flashing twice a second :
the battery is between
50% ~ 75% charged.
- Flashing three times a second : the battery is
between 75% ~ 100% charged.
- Constantly stays on : Charging is complet.
- On for a second and off for a second : there is an
error and the charger needs to be reset.
5. If recharging is completed, separate the camcorder,
AC power adapter, and battery pack.
I
Even if the power is turned off, the battery will still
discharged over time if left connected to the camera.
Note: Battery pack may be charged a little at the time of
purchase.
Configuración de la videocámara
Para el uso de la batería
¿Qué duración tendrá la batería para filmar?
Recarga de la batería
1
2
3
4
OFF
5. Si se ha completado la recarga, separe la videocámara,
Nota: La batería puede estar parcialmente cargada
✤ La frecuencia con que se usan las lentes de zoom.
Prepare tantas baterías como sea posible
1. Conecte la batería a la
videocámara.
2. Conecte el adaptador de
corriente AC a un cable AC y
conecte el cable a una toma
de pared.
3. Conecte el cable DC a un jack
DC de la videocámara.
4. Apague la videocámara y el
indicador de recarga comen-
zará a parpadear y comenzará
la carga.
- Parpadeo una vez por
- Parpadeo dos veces por
- Parpadeo tres veces por
- Se detiene el parpadeo y la luz es contínua:
Se ha completado la recarga.
- Encendido y apagado cada segundo: Indica algún
error. Vuelva a colocar la batería y el cable DC.
el adaptador de corriente y la batería.
- Incluso si se ha apagado la cámara, se descargará la
batería.
en el momento de la compra.
ESPAÑOL
segundo: Indica que se ha
cargado menos del 50%.
segundo: Indica que se ha
cargado el 50% ~ 75%.
segundo: Indica que se ha
cargado el 75% ~ 100%.
19
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Vp-w97

Tabla de contenido