Frequently Asked Questions; Cleaning The Pre-Filter; Cleaning The Fine Dust Filter Manually; Technical Service - Miele SKCE0 Instrucciones De Funcionamiento

en-US

Frequently asked questions


Always switch off the vacuum
cleaner before attempting to rectify a
fault and unplug it.
Cleaning the pre-filter (Figs. 29 + 30)
The pre-filter is located at the rear of the
vacuum cleaner.
This should be cleaned if it is obviously
dirty.
 Remove the dust container.
 Release the handle of the pre-filter
and remove the pre-filter.
 Rinse the pre-filter under cold running
water.

Do not use detergent!
Do not use any sharp or pointed ob-
jects!
Dry the pre-filter carefully!
 Replace the dry filter in the dust con-
tainer and lock the handle.
 Reinsert the dust container in the
vacuum cleaner.
Cleaning the fine dust filter
manually (Figs. 31 - 36)
Allow a drying time of 24 hours.
 Remove the dust container.
 Release the fine dust container in the
direction of the arrow and remove it.
 Run a little water into the opening at
the top of the fine dust container.
 Gently shake the fine dust container
back and forth.
This will rinse out the dust.
20
 Shake the water out of the opening.
 Release the top so that the marking is
pointing to the  symbol.
 Carefully lift the fine dust filter up and
out of the fine dust container.
 Clean the outside of the fine dust fil-
ter under cold running water.

Do not clean the inside of the
fine dust filter!
Do not use detergent!
Do not use any sharp or pointed ob-
jects and do not brush the fine dust
filter!
After cleaning, allow the fine dust fil-
ter to dry for a minimum of 24 hours!
 Clean the fine dust container with wa-
ter and mild detergent.
 Dry the fine dust container carefully.
 Insert the dry fine dust filter into the
dry fine dust container so that the
marking is pointing to the  symbol.
 Lock the top into place so that the
marking is pointing to the  symbol.
 Reinsert the fine dust container in the
vacuum cleaner and lock it into place.
 Reinsert the dust container in the
vacuum cleaner.

Technical Service

Contact in case of fault

In the event of a fault which you cannot
remedy yourself, please contact your
Miele dealer or Miele Technical Service.