User Menu - Airzone AZXWSERVERAPP Manual De Usuario

o Speed 3 or High
* Not available in ventilation time schedules.
 End event
programme.
 End
parameters are the same as those described for Start.
*Note: If you have selected Ventilation programming, the end status will be deactivated.
After the scheduled programming has been completed, press
Control Panel will return to the programmes overview screen adding the programme
created.
In case you want to remove a programme, press
programmes overview screen removing the deleted programming.
If you want to exit without making changes, press

3.2.3.2. User menu

It is allowed to set up the user parameters of each zone
from the Webserver. To access the user menu, press the
user menu icon
will display a list of the configuration parameters and their
status.
If you want to modify any parameter, press the parameter
and select the desired value (Fig. 11).
 Frosty weather: This option prevents the room
temperature from rising below 12ºC, although the
zone is deactivated. To activate this option press
ON. If you want to deactivate it, press OFF.
 Heating mode: In the case of controlling radiant and
air elements in your zone, this option allows
selecting the element you want to use in heating mode. It is possible to select the values
Air , Radiant
 Cooling mode: In the case of controlling radiant and air elements and in its zone, this
option allows selecting the element you want to use in cooling mode. It is possible to
select the values Air
 Heating angle: This option allows defining the slat inclination in the Airzone intelligent
grilles of the zone in heating mode
 Cooling angle: This option allows defining the slat inclination in the Airzone intelligent
grilles of the zone in cooling mode
. This option allows activating or deactivating the end event in the
*. This option allows defining the programming parameters. The
(Fig. 4) and then, the Control Panel
and Combined
, Radiant
.
. The Control Panel will return to the
.
.
and Combined
.It is possible to select the values 40º-45º-50º-90º.
.It is possible to select the values 40º-45º-50º-90º.
to save the changes. The
Fig. 11
.
37