Sleep Function - Airzone AZXWSERVERAPP Manual De Usuario

To access to a zone control, press on the zone box in System control panel or select the zone
in the navigation menu. In the control panel, the zone window appears, allowing the modification
of the following variables:
 Zone
: Indicates the name of the zone you want to
control. If you want to modify the name, press on the name
displayed in the control zone. Then, a pop-up menu appears
for its modification (Fig. 5).
*Note: Use alphanumeric characters, without accents and punctuation
marks.
 Room temperature
 Scheduled programming Activation
deactivating the scheduled programming mode of the selected zone. To modify its status,
press on the status icon (Fig. 5).
 Set temperature
for the zone. Only available in case the zone is activated.
Press the set value for displaying the temperature selection
bar. Set the desired temperature (in steps of 0.5ºC). Once
the desired temperature has been defined, the bar retracts
automatically (Fig. 6).
 Energy Efficiency indicator
the system in relation to the operating temperature (Fig. 6):
- Green: High Energy Efficiency.
- Yellow: Medium-High Energy Efficiency.
- Orange: Medium-Low Energy Efficiency.
- Red: Low Energy Efficiency.
 Sleep Function
timer. Only available in case the zone is activated. Press
the Sleep variable defined
selection bar.
Once the desired variable has been defined, the bar will
disappear automatically. The available options in the
selection bar are (Fig. 7):
- OFF: Eco-Timer is not activated.
- 30: Activates the timing and 30 minutes after its activation, the zone will be
deactivated.
- 60: Activates the timing. 30 minutes after its activation, the zone temperature will
change its set point temperature by 1ºC and 60 minutes after its activation, it will be
deactivated.
- 90: Activates the timing. 30 minutes after its activation, will change its set point
temperature by 1ºC, another 1ºC after 60 minutes, and will be deactivated following
90 minutes after its activation.
34
: Indicates the room temperature of the zone (Fig. 5).
: Defines the desired temperature
: This multi-colour icon reflects the energy efficiency level of
: The Sleep function is a zone eco-
to display the Sleep
/Deactivation : This option allows activating or
Fig. 5
Fig. 6
Fig. 7