Getting To Know Your Mini Cub; Playing With Your Mini Cub - WowWee Alive minis Guia De Inicio Rapido

Getting to know your Mini Cub

Now that you've adopted your own Mini Cub, it's time to get to know him better!
Powering On/Off the first time
The Mini Cub's main power switch is located on his belly which you can
access through the flap beneath in his fur . The switch has three settings:
• Try Me
• Off
• On
Try Me power setting
When you first remove the Mini Cub from his packaging, the switch will be set to Try Me . The
Try Me function is used for demonstrating very basic functions and is not used in normal play .
NOTE: You will only need to use the Try Me setting when you first use him . After that, you
will only need to use the Off and On power settings .
Normal play setting
When you want to play with him and access all his functions, you need to first set the switch
to the Off position, and then wait 3 seconds before setting it to the On position .
IMPORTANT: If you do not wait after switching the Mini Cub to the Off setting, he will
remain in the previous power setting .

Playing with your Mini Cub

Your Mini Cub responds to your touch when you pick
him up and pet his head . . . he might squeal, whimper or
even gurgle! He is equipped with a touch sensor on his
head . He also has a tilt sensor which can tell him when
he's being rolled over side-to-side .
You can feed him using his feeding bottle (see page 3)
— he will close his eyes just like a real baby animal .
Leave him alone for 4 minutes and he will begin to
snore and go into Sleep Mode (refer to Sleep Mode on
page 6 for details) .
Ge tting to k now your Mi ni C ub
OFF
TRY ME ON
5