Becken BDH4758 Manual De Instrucciones página 34

• When you remove the collector, if there is some water in the unit you
must dry it.
2. Continuous draining
• Water can be automatically emptied into a floor drain by attaching
the unit to a water hose (not included).
• Remove the rubber plug from the back drain hose outlet. Attach a
drain hose (ID = 13.5 mm) and lead it to the floor drain or a suitable
drainage facility (see Fig. 7).
• Make sure the hose is secure so there are no leaks.
• Direct the hose toward the drain, making sure that there are no kinks
that will stop the water flowing.
• Place the end of the hose into the drain and make sure the end of the
hose is levelled or down to let the water flow smoothly. Never let it up.
• Make sure the water hose is lower than the drain hose outlet.
• Select the desired humidity setting and fan speed on the unit for
continuous draining to start.
Attach the hose
to the drain
hose outlet.
34
Remove the
rubber plug
Fig. 7