Becken BDH4758 Manual De Instrucciones página 12

cord under furniture or appliances. Place the cord away from traffic
areas and where it will not be tripped over.
• Do not open the dehumidifier during operation.
• When the air filter needs to be removed, do not touch the
dehumidifier's metal parts.
• Hold the plug by the head of the power plug when taking it out.
Electrical Information
• The manufacturer's nameplate is located on the dehumidifier's rear
panel and it contains electrical and other technical data specific to
this unit.
• Make sure the unit is properly grounded. To minimize shock and fire
hazards, proper grounding is important. The power cord is equipped
with a three-prong grounding plug for protection against shock
hazards.
• Your unit must be used in a properly grounded wall receptacle. If
the wall receptacle you intend to use is not adequately grounded or
protected by a time delay fuse or circuit breaker (the fuse or circuit
breaker needed is determined by the maximum current of the unit.
The maximum current is indicated on the nameplate located on
unit), have a qualified electrician install the proper receptacle.
• Make sure the receptacle is accessible after the unit's installation.
• Do not use extension cords or an adapter plugs with this
dehumidifier. However, if it is necessary to use an extension cord,
use an approved "Dehumidifier" extension cord only (available at
most local hardware stores).
• To avoid the possibility of personal injury, always disconnect the
power supply from the unit before installing and/or servicing.
12