Risk Of Electric Shock - Kenmore 111.7302 Serie Manual De Uso Y Cuidado

REMOVING AND REPLACING
REFRIGERATOR DOORS
WARNING

Risk of electric shock!

Before removing top hinge cover
• Shut off the water supply to the appliance.
• U nplug the appliance or switch off power from the
breaker or fuse panel.
To remove the left refrigerator door:
1. Remove top hinge cover using a phillips type
screwdriver by removing 5 screws
2. Remove the grounding wire screw and pull out the
grounding wire (green with yellow stripe). Disconnect
the main wire harness (blue and yellow wires).
3. Using a large phillips screwdriver, turn top hinge
fastener counterclockwise to remove the top hinge
plate.
CAUTION: After the hinge is removed, the door can
fall down forward. Hold the door to prevent it from
falling.
REFRIGERATOR INSTALLATION
13
1. Determine which refrigerator door
needs to be raised.
4. Lift the door from the middle hinge pin and remove
the door. Place the door, inside facing up, on a non-
scratch surface.
properly aligned:
the appliance.
WARNING
down.
Risk of electric shock!
Before removing the top panel:
1. Shut off the water supply to the
appliance.
To remove the right refrigerator door:
1. Remove top hinge cover using a phillips type
screwdriver by removing 5 screws.
2. Using a large phillips screwdriver, turn top hinge
fastener counterclockwise to remove the top hinge/
plate.
CAUTION: After the hinge is removed, the door can
fall down forward. Please secure door during this
process.
appliance.
2. Mount the base plate.
tighten.
5. Move the hinge sideways to adjust
the refrigerator door.
3. Lift the door from the middle hinge pin and remove
the door. Place the door, inside facing up, on a non-
scratch surface.