Access To Menus - BFT EOS 120 VENERE D Manual De Instalación

ACCESS TO MENUS

Press the OK key
OK
BFT
Control unit software version
venere d
No. total manoeuvres
OK (x 10)
0000
No. manoeuvres since latest
0000
maintenance(x 10)
00
No. radio control devices
memorised
op. torque
End
cls. torque
part. open
zone
op speed
cl speed
dist. s loud
LOGIC.
End
FOLLOWING MENUS
FIG. B
All manuals and user guides at all-guides.com
8888
[ ]
Preset value
00
Parameter increment/reduction
/ON
or ON/OFF commutation
/OFF
Press OK key (Enter/confirm) OK
- + Menu scrolling
(+ = preceding - = following)
3 step
ibl open
pre-alarm
photoc. open
test phot
sca 2 ch
fixed code
radio prog
start-open
ped-close
master
Fig. A
LEGENDA
+/-
OK
PRG
PRG
Simultaneously press the + and - keys.
Simultaneous pressure of the + and – keys
allows you to exit the active menu and return
to the preceding menu; if this takes place at
the main menu level, programming is exited
and the display switched off.
The modifications made are only confirmed if
the OK key is subsequently pressed.
OK! message (confirms modification made)
KO! message (value or function error)
"Wait" message (enter value or function)
EOS 120 VENERE D -
15