• Do not block air outlets or air inlets. It may cause a malfunction.
• Do not spill water on the remote control, as this may damage the remote
control.
• If any of the phenomena below occur, please turn off the air conditioner,
disconnect the power immediately, and then contact the dealer or qualified
professionals for service:
> Power cord is overheating or damaged.
> There is an abnormal sound during operation.
> Frequent tripping of the circuit breaker.
> Air conditioner gives off a burning smell.
> Indoor unit is leaking.
• If the air conditioner operates under abnormal conditions, it may cause a
malfunction, electric shock or fire hazard.
• When turning the unit on or off using the emergency operation switch, please
press this switch using a non-metallic insulating object.
• Do not step onto or place heavy objects on top of the outdoor unit. It may cause
damage or personal injury.
• Installation must be performed by qualified professionals in accordance with
the requirements of NEC and CEC. Otherwise, it may cause personal injury or
damage.
• Electrical safety regulations must be followed when installing the unit.
• In accordance with the local safety regulations, use a compliant power supply
circuit and circuit breaker. Do install a circuit break. Not doing so, may cause
malfunction.
• An all-pole disconnection switch with a contact separation of at least 3 mm for
all poles should be connected in fixed wiring.
• When including a circuit breaker with suitable capacity, please note the table in
subsequent pages. The air switch should include a magnet buckle and a heating
buckle function to protect the unit from short-circuit and overload.
• Make sure the power supply matches the air conditioner's requirements. An
unstable power supply or incorrect wiring may cause a malfunction. Please
install suitable power supply cables before using the air conditioner.
• Correctly connect the live wire, neutral wire and ground wire of the power
socket.
• Be sure to cut off the power supply before proceeding with any work related to
electricity and safety.
• Do not reconnect the power before finishing the installation.
• The temperature of refrigerant circuit will be high, please keep the
interconnection cable away from the copper tube.
• The appliance shall be installed in accordance with national wiring regulations.
• The air conditioner is a first class electric appliance. It must be properly
grounded with a specialized grounding device by a professional. Please make
sure it is always grounded effectively, otherwise it may cause electric shocks.
• The yellow-green wire in the air conditioner is the grounding wire, which cannot
be used for any other purposes.
6
G306MA_AF1_AC18_indoor_170216.indd 6-7
• The grounding resistance should comply with national electric safety
regulations.
• The appliance must be positioned so that the plug is accessible.
Indoor Unit
• All wiring of the indoor and outdoor units should be connected by a
professional.
• If the length of power connection wire is insufficient, please contact the supplier
for a new one. Do not extend the wire yourself.
• For air conditioners with plugs, the plug should be accessible after the
installation is completed.
• For air conditioners without plugs, a circuit breaker must be installed in the line.
• If you need to relocate the air conditioner to another place, only a qualified
person can perform the work. Otherwise, it may cause personal injury or
damage.
• Select a location which is out of reach of children and far away from animals or
plants. If this is unavoidable, please add a fence for safety purposes.
• The indoor unit should be installed tight to the wall.
2. USE AND OPERATION
2.1. Product Description
Indoor Unit
Content or position may be different
from above graphics.
Please refer to actual products
Split Air Conditioner | Aire acondicionado Split | Ar condicionado Split
EN
air inlet
panel
filter
aux. button
horizontal louver
air outlet
remote control
7
17.02.16 18:33