▶ Keep batteries away from rain, moisture and liquids. Penetrating moisture
can cause short circuits, electric shock, burns, fire and explosions.
▶ Use only chargers and power tools approved for the specific battery
type. Read and follow the relevant operating instructions.
▶ Do not use or store the battery in explosive environments.
▶ If the battery is too hot to touch, it may be defective. Put the battery
in a place where it is clearly visible and where there is no risk of fire,
at an adequate distance from flammable materials. Allow the battery
to cool down. If it is still too hot to touch after an hour, the battery is
faulty. Consult Hilti Service or read the document entitled "Instructions
on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage
and use of lithium-ion batteries. → page 15
Read the instructions on safety and use of Hilti Li-ion batteries
that you can access by scanning the QR code at the end of these
operating instructions.
3
Description
3.1 Product overview
Chuck
@
Product / accessory interface
;
(snap connection)
Universal hook
=
Motor cooling air intake
%
Grip
&
Air discharge
(
Forward/reverse switch with
)
switch-on interlock
Lock button for continuous
+
operation
3.2 Intended use
The product described is a hand-held cordless electric tool for use in drywall
installation work.
The product is designed for driving and removing screws in drywall installa-
tion work. Drywall screws with a length of up to 55 mm and a diameter of up
to 4.2 mm can be used.
•
For this product, use only Hilti Nuron lithium-ion batteries of the B 22
series. For optimum performance, Hilti recommends the batteries stated
in the table at the end of these operating instructions for this product.
•
For these batteries, use only Hilti chargers of the type series stated in
the table at the end of these operating instructions.
8
English
1
§
/
:
∙
$
£
|
Control switch (with electronic
speed control)
Belt hook / installation open-
ing for accessories
Battery
Battery status indicator
Release button for battery
Work-area light (LED)
Depth gauge
2293285
*2293285*