Using The Control Panel - Chauvin Arnoux DTR 8510 Manual De Instrucciones

Select Configure Instrument. The Select Instrument dialog box will appear.
Select DTR and press OK. The Connection dialog box will appear (see Fig. 7-4).
The Connection window specifies the connected instrument in the communications drop-down list.
If multiple units are attached, select the desired unit with its associated serial number from the drop-down list.
Once the desired instrument has been selected, click OK and the DTR
(see Fig. 7-8).

7.3. USING THE CONTROL PANEL

The Control Panel is used for instrument operation and configuration.
To open the Control Panel refer to § 7.2.
The main menu at the top of the screen lists the following commands:
File
Open - Opens a DTR *.icp file
Save - Saves the report file in the appropriate folder
Save as - Permits the user to save the report at the location of his choice
Create DataView Report - Generates report for the open test results
Print Test - Prints the result of the test
Print Preview - Provides a preview of the selected test to be printed
Figure 7-6
8510 Control Panel and Configuration window will open
®
Figure 7-7
70