Environmental Protection - Worx Professional WU404 Manual Del Usuario

Work hints for your reciprocating
saw
If your power tool becomes too hot, set the speed to maximum and
run a no load for 2-3 minutes to cool the motor.
Always ensure the work-piece is firmly held or clamped to prevent
movement.
The pivot foot plate must be held firmly against the material being cut
to reduce saw vibration, blade jumping and blade breakage.
Maintenance
Remove the plug from the socket before carrying out any
adjustment, servicing or maintenance.
Your power tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool. Never use
water or chemical cleaners to clean your power tool. Wipe clean with
a dry cloth. Always store your power tool in a dry place. Keep the
motor ventilation slots clean. Keep all working controls free of dust.
Occasionally you may see sparks through the ventilation slots. This is
normal and will not damage your power tool.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
All manuals and user guides at all-guides.com
11

Environmental protection

This product has been marked with a symbol relating to
removing electric and electronic waste. This means that this
product shall not be discarded with household waste but that
it shall be returned to a collection system which conforms to the
European Directive 2002/96/CE. It will then be recycled or dismantled
in order to reduce the impact on the environment. Electric and
electronic equipment can be hazardous for the environment and for
human health since they contain hazardous substances.