Environmental Protection - Worx Professional WU529 Manual Del Usuario

Working hints for your cordless
circular saw
Always use a blade suited to the material and material thickness to
be cut. The quality of cut will improve as the number of blade teeth
increase. Always ensure the work-piece is firmly held or clamped to
prevent movement. Support large panels close to the cut line. Any
movement of the material may affect the quality of the cut. The blade
cuts on the upward stroke and may chip the uppermost surface or
edges of your work piece when cutting, ensure your uppermost
surface is a non visible surface when your work is finished.
1 PARALLEL GUIDE (See Fig.F )
The parallel guide enables exact cuts along a workpiece edge and
cutting strips of the same dimension.
2
BEVEL CUTS (See Fig.G)
Set required bevel angle between 0° and 50°. Do not use the depth
of cut scale when making bevel cuts due to possible inaccuracy.
Maintenance
Remove the battery pack from the tool before carrying out any
adjustment, servicing or maintenance.
Your power tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool. Never use
water or chemical cleaners to clean your power tool. Wipe clean with
a dry cloth. Always store your power tool in a dry place. Keep the
All manuals and user guides at all-guides.com
11
motor ventilation slots clean. Keep all working controls free of dust.
Occasionally you may see sparks through the ventilation slots. This is
normal and will not damage your power tool.

Environmental protection

Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authorities or retailer for recycling advice.
Disposal of an exhausted
battery pack
To preserve natural resources, please recycle or dispose of
the battery pack properly. This battery pack contains Lithium
batteries. Consult your local waste authority for information
regarding available recycling and/or disposal options. Discharge your
battery pack by operating your tool, then remove the battery pack from
the tool housing and cover the battery pack connections with heavy-
duty adhesive tape to prevent short circuit and energy discharge. Do
not attempt to open or remove any of the components.