Idiomas disponibles
Idiomas disponibles
1. GENERAL DESCRIPTION
Type ZD12/C is typically used on a door, gate, automation device, etc. to guarantee access control through the recognition of an enabled card.
Accepts data from readers in Wiegand format. Although extremely small, it can be used to directly control electrically operated locks thanks to the integrated
relay with contact capacity of 5A. The internal memory can manage 250 different user codes.
2. TECHNICAL CHARACTERISTICS - CONNECTIONS
Power supply: 12-24 Vac/dc
Consumption: Min. 50 mA – Max. 80 mA
Input data format: Wiegand 26 bit, Wiegand 30 bit, Wiegand 37 bit
Memory capacity: 250 users
No. of output relays: 1 (Timed 1s or Bistable, selectable)
Relay contact rating: 5 A
Indicators: Bi-colour LED (RED / Green)
Protection class I.P. 44
Dimensions/weight 10 x 5.5 x 2.1 cm 62 g
Terminal
Description
1
12-24 Vac/dc
2
12-24 Vac/dc
3 – NO
Relay N.O.
4 – COM
Relay common
5 – NC
Relay N.C.
6 – D0
DATA0 Wiegand line
7 – D1
DATA1 Wiegand line
3. OPERATION
The built-in two-colour red/green LED provides all the indications necessary to identify the current programming phase and activate the relay.
4. PROGRAMMING
Inserting codes
1. Press the programming key.
2.
With the key touch the reader connected to the central
the next badge.
3. Wait 30s to exit programming mode or press the key again. LED goes back to being red.
Deactivating codes
1. Keep key pressed for 3s. LED flashes red.
2.
With the key touch the reader connected to the central unit.
red again before disabling another key.
3. The time available for presenting the badge is 30s for the first code and 10s for subsequent codes. Once this time has elapsed,
matically exits the disabling procedure. The LED returns to standby condition (red steady light or green steady light depending on the relay operating
mode).
Total cancellation of all codes
Take extreme care when carrying out the following operation. It will cancel all data from the memory. Once the cancellation procedure has been carried
out, the programming cannot be recovered.
1. Keep key pressed for 3s. LED flashes red.
2. Press key again. Red LED flashes more rapidly.
3. Total cancellation completed.
5. RELAY OPERATING MODE
1. Press the key. LED switches from red to green.
2. Press key and keep pressed for 3 seconds. Relay switches from mono- to bi-stable operating mode each time key is pressed. LED signals mode change
over by flashing: 1 Green Flash = Monostable; 2 Green Flashes = Bi-stable.
6. PROGRAMMING WITH GTSYSTEM Type ZD12/P
Control unit is provided with a connector for the multifunction terminal type ZD12/P (see figure).
Using the programmer you can:
• disable keys
• assign identifiers to the keys
• save the content of the memory to a backup file. Please see the user manual of GTSYSTEM.
Please see the user manual of ZD12/P.
EN
All manuals and user guides at all-guides.com
unit. Green LED flashes to signal entry. Wait for green LED to stay fixed again before entering
Red LED starts flashing rapidly to signal badge disabled. Wait until the LED flashes slowly
(programmer)
the control unit
auto-
Connector for ZD12/P
1
