SNOWJOE iON100V-24SB-CT Manual Del Usuario página 5

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Information about the charger and the
charging process
1. Please check the data marked on the rating plate of the
battery charger. Be sure to connect the battery charger
to a power supply with the voltage marked on the rating
plate. Never connect it to a different mains voltage.
2. Protect the battery charger and its cord from damage.
Keep the charger and its cord away from heat, oil and
sharp edges. Have damaged cords repaired without delay
by a qualified technician at an authorized Snow Joe
Sun Joe
dealer or call the Snow Joe
®
customer service center at 1-866-SNOWJOE
(1-866-766-9563).
3. Electrical plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
grounded appliances. Unmodified plugs and matching
outlets will reduce the risk of electric shock.
4. Keep the battery charger, battery packs and the cordless
tool out of the reach of children.
5. Do not use the battery charger to charge other cordless
tools.
6. During periods of heavy use, the battery packs will
become warm. Allow the battery packs to cool to room
temperature before inserting into the charger to recharge.
7. Do not overcharge batteries. Do not exceed the maximum
charging times. These charging times only apply to
discharged batteries. Frequent insertion of a charged or
partially charged battery pack will result in overcharging
and cell damage. Do not leave batteries in the charger for
days on end.
8. Never use or charge batteries if you suspect that they
have been more than 12 months since the last time they
were charged. There is a high probability that the battery
pack has already suffered dangerous damage (exhaustive
discharge).
9. Charging batteries at a temperature below 32°F (0°C) will
cause chemical damage to the cells and may cause a fire.
10. Do not use batteries that have been exposed to heat
during the charging process, as the battery cells may have
suffered dangerous damage.
11. Do not use batteries that have suffered curvature or
deformation during the charging process or those that
exhibit other atypical symptoms (gassing, hissing,
cracking, etc.)
12. Never fully discharge the battery packs (maximum
recommended depth of discharge is 80%). A complete
discharge of the battery pack will lead to premature aging
of the battery cells.
Protection from environmental
influences
1. Wear suitable work clothes. Wear safety goggles.
2. Protect your cordless tool and the battery charger from
3. Do not use the cordless tool or the battery charger near
4. Use the battery charger only in dry conditions and at an
+
®
+ Sun Joe
®
®
5. Do not keep the battery charger in places where the
6. Protect batteries from overheating. Overloads,
7. Store the charger and your cordless tool only in dry
8. Prevent the lithium-ion battery packs from freezing.
9. When handling batteries, be wary of electrostatic charge.
5
moisture and rain. Moisture and rain can cause dangerous
cell damage.
vapors and flammable liquids.
ambient temperature of 32°F – 104°F (0°C – 40°C).
temperature is liable to reach over 104°F (40°C). In
particular, do not leave the battery charger in a car that is
parked in the sunshine.
overcharging and exposure to direct sunlight will result
in overheating and cell damage. Never charge or work
with batteries that have been overheated – replace them
immediately, if possible.
locations with an ambient temperature of 50°F – 104°F
(10°C – 40°C). Store your lithium-ion battery packs in a
cool, dry place at a temperature of 50°F – 68°F
(10°C – 20°C). Protect the battery packs, charger and
cordless tool from humidity and direct sunlight.
Only place fully charged batteries in storage (charged
to at least 40%).
Battery packs that were stored below 32°F (0°C) for more
than 60 minutes must be discarded.
Electrostatic discharges can damage the electronic
protection system and the battery cells. Avoid electrostatic
charging and never touch the battery poles.
Tabla de contenido
loading

Tabla de contenido