Warning Notes; Configuration - LRP Competition Starterbox Manual Del Usuario

USER MANUAL
LRP STARTER BOX
DAVIDE ONGARO WORLD CHAMPION EDITION
DEAR CUSTOMER,
thank you for your trust in this LRP product. By purchasing a LRP Competition Starterbox, you have chosen a high-
performance starterbox for your RC model. The outstanding features amongst others are:
• Powerful and oversized 750 motor
• Suitable for .12 to .32 (2.11 - 5.24ccm) engines
• On/Off-switch at the back of the starterbox
• Fully adjustable for 1/10 and 1/8 models
Please read the following instructions carefully before you start using your LRP Competition Starterbox for the first time
and to ensure that your LRP Competition Starterbox always works up to your full satisfaction. This user guide contains
important notes for the installation, the safety, the use and the maintenance of this product. Thus protecting yourself
and avoid damages of the product.
Proceed according to the user guide in order to understand your LRP Competition Starterbox better. Please take your
time as you will have much more joy with your LRP Competition Starterbox if you know it exactly.
This user manual shall be kept in a safe place. If another customer is using this product, this manual has to be handed
out together with it.
1. ASSEMBLY
Front alignment bracket
1. First, assemble the front and rear alignment brackets as it is shown on the pictures.
2. Then mount the 4 plastic feet on the case.
3. By using the positioning parts you can perfectly adapt your starterbox to your particular car. The flywheel should
be placed exactly above the starting disc. Take care, that the starting disc does not touch the chassis when you
push the car down.
4. Put the batteries into the starterbox, secure them with the integrated battery clamps and connect the plugs. You
are now able to switch on or switch off your starterbox with the ON/OFF-switch at the back of the starterbox.
You do not need to unplug the batteries everytime you want to switch off your starterbox.
Note: Let the motor run for one second before you start the engine with the starting disc. This will extend the
lifetime of the battery and the motor.

2. CONFIGURATION

The LRP Competition Starterbox can be used in two different configurations. Which of the two configurations you
have to use depends on the car you are driving. Please check the shown pictures and the explanations for further
reference.
For changing the configuration of the motor and the starting disc you only have to unscrew the 4 screws which hold
the motor and starting disc mount on the Starter Box top plate.
Motor and starting disc configuration for the use of
1/10 and 1/8 scale On-Road cars.
ZA00029 © Lautenbach Racing Products GmbH 2019
Rear alignment bracket
Overview
Motor and starting disc configuration for the use of
1/8 scale Off-Road cars.
#37102
3. SPARE- AND TUNINGPARTS
Order No. Type
Truggy positioning brackets front/rear
37195
incl. screws
37190 Small parts set
37191 Motor incl. cables
Buggy positioning brackets front/rear
37192
incl. screws
REPAIR PROCEDURES /
LIMITED WARRANTY
Products of Lautenbach Racing Products GmbH (hereinafter referred to as „LRP") are manufactured according to
the strictest quality criteria. We grant the legal guarantee on production and material defects, which were present
at the time of the delivery of the product. We are not liable for typical signs of wear and tear. This warranty does
not apply to defects resulting from improper use, lack of maintenance, external intervention or mechanical damage.
Damage or loss of performance due to mishandling and/or overload are not product defects.
If you are of the opinion that this product has a defect, please first check all other components in your model and,
if necessary, refer to the product's troubleshooting guide to rule out other sources of interference and operating
errors. If the product does not show any malfunction when checked by our service department or if there is no
legitimate warranty or guarantee claim, we will have to charge you for the processing costs incurred. A warranty
or guarantee claim can only be accepted if a copy of the proof of purchase (Date of purchase verified by electronic
sales receipt indicating quantity, part number and/or product name, sales amount and sales date) is enclosed.
For a quick handling of your service case, please enclose a detailed description of the fault and your address and
contact data with the return.
If a returned defective product is no longer produced by LRP and we are unable to repair it, you will receive a
product of at least the same value from one of the successor series instead in the event of a warranty claim.
LRP's weight, size or other values are provided for guidance only. LRP assumes no formal obligation for such
specific information as technical changes made in the interest of the product may result in different values.
LRP Factory Service:
see www.LRP.cc
! !

WARNING NOTES

No toy. Not suitable for children under 14 years.
Keep the product out of the reach of children.
Pay close attention to the following points, as they can destroy the product and void your warranty:
• Non-observance of these points can lead to property damage, personal and severe injuries!
• Never leave the product unsupervised while it is switched on, in use or connected with a power source. If a
defect occurs, it could set fire to the product or the surroundings.
• Avoid incorrect connections or connections with reversed polarity of the product.
• Never cut off or modify the original plugs and original wires.
• Always charge the battery, which is necessary to use this product, outside of the product. The product could get
damaged, if a battery defect occurs.
• Use the starterbox for engines with a maximum displacement of .32 (5.24ccm) only.
! !
• The manufacturer can not be held responsible for damages, which are a result of non-observance of the warning
notes and security advices.
The crossed-out wheeled bin means that with European Union the product must be taken to separate collection at product end-of
life. Do not dispose these products as unsorted municipal waste
Lautenbach Racing
Products GmbH
Hanfwiesenstraße 37
73614 Schorndorf
Deutschland
Content
Truggy positioning brackets front/rear incl.
screws
Replacement belts and starting disc
Replacement Motor with all necessary cables
Buggy positioning brackets front/rear incl.
screws