Turbosound iQ Serie Manual Del Usuario página 8

14
iQ Series
Networking capability
All iQ powered loudspeakers offer remote control via USB. The USB connection allows the user to configure and monitor all DSP parameters using dedicated iQ
software for PC.
The DSP firmware can also be updated via the USB connection. Visit Turbosound.com for the latest firmware version.
iQ speakers also offer proprietary ULTRANET networking capabilities through the ULTRANET IN and THRU connections using CAT5 cables with RJ45 connectors.
ULTRANET allows the user to transmit unidirectionally up to 16 independent channels of 24-bit audio throughout the iQ system, as well as other ULTRANET-equipped
devices such as digital mixers and personal monitor systems. Up to 7 devices can be connected in series on a single ULTRANET cable. ULTRANET can also be used for
remote control of the iQ selection of modeled speakers.
Midas DL16
iQ18B iQ12
ULTRANET connection with Midas M32 digital mixer and Midas DL16 digital snake
Midas M32
iQ12 iQ18B
Networked mains power
iQ loudspeakers also facilitate networked transmission of mains power using power cables with Neutrik powerCON locking power connectors. To set up networked
mains power between iQ loudspeakers, first run a power cable terminating in a powerCON connector to the AC INPUT connector on the rear panel. To power additional
speakers downline, run power cables equipped with powerCON connectors at both ends from the first speaker's AC LINK OUTPUT to the AC INPUT of the next iQ
loudspeaker in series. The maximum number of linked systems depends on the AC supply voltage as well as the maximum current draw of the individual systems in
the power chain. When linking a power chain, make sure that the integrated connectors as well as the supplied AC mains cable are never overloaded. If you are
uncertain how to calculate the total current draw, please contact your dealer.
iQ speakers powered in series
15
Quick Start Guide