Turbosound iQ Serie Manual Del Usuario página 37

72
iQ Series
Technical Specifications
iQ15
System
50 Hz – 18 kHz ±3 dB
Frequency response
42 Hz – 20 kHz -10 dB
Nominal dispersion 75° H x 55° V @ -6 dB points
132 dB peak
Maximum SPL
Crossover type Active
1 x 1" (387 mm) LF driver
Transducers 1 x 1" (25.4 mm)
HF compression driver
Independent HF, LF,
Limiter
peak and rms
Amplifier
Maximum output power* 2,500 W
Class-D
Type
Protection Short circuit, open circuit, thermal
Connectors
2 x combo jack/XLR
Input A / B
Sensitivity Line +4 dBu, mic -22 dBu, switchable
Input impedance 20 kΩ unbalanced, 40 kΩ balanced
Maximum input level +21 dBu
Output A / B 2 x XLR Linked to input
Mix output XLR, balanced
Output impedance 100 Ω unbalanced, 200 Ω balanced
Ultranet input/link 2 x RJ45
Mains Supply Neutrik powerCON input 20A and link 15A
Controls
Rotary push-encoder
DSP
Buttons for PROCESS, SETUP, EXIT, ENTER
2 x gain controls
Mixer section (channels A and B)
2 x Line/Mic switch
User DSP Functions
Positioning, Sound mode,
Factory EQ presets
Sound Modeling, FBQ
Display LCD 128 x 32, blue backlit
0 - 300 ms
Delay
High and low shelving EQ
Equalisation
2 x parametric EQ
Limiter Zero attack input limiter
20 total presets, 19 user-definable
Presets
Crossover High Pass L-R 24 dB/oct
Protection Lock-out function for all settings
iQ15B iQ18B
50 Hz – 130 Hz ±3 dB 50 Hz – 100 Hz ±3 dB
40 Hz – 130 Hz -10 dB 36 Hz – 100 Hz -10 dB
Half Space Half Space
130 dB peak 132 dB peak
Active Active
1 x 15" (385.7 mm) LF driver 1 x 18" (460 mm) LF driver
Peak and rms Peak and rms
3,000 W 3,000 W
Class-D Class-D
Short circuit, open circuit, thermal Short circuit, open circuit, thermal
2 x combo jack/XLR 2 x combo jack/XLR
Line +4 dBu Line +4 dBu
20 kΩ unbalanced, 40 kΩ balanced 20 kΩ unbalanced, 40 kΩ balanced
+21 dBu +21 dBu
2 x XLR Linked to input 2 x XLR Linked to input
N/A N/A
N/A N/A
2 x RJ45 2 x RJ45
Neutrik powerCON input 20A and link 15A Neutrik powerCON input 20A and link 15A
Rotary push-encoder Rotary push-encoder
Buttons for PROCESS, SETUP, EXIT, ENTER Buttons for PROCESS, SETUP, EXIT, ENTER
1 x gain controls 1 x gain controls
(channels A and B) (channels A and B)
2 x Line 2 x Line
Positioning, Sound mode, Positioning, Sound mode,
Sound Modeling, FBQ Sound Modeling, FBQ
LCD 128 x 32, blue backlit LCD 128 x 32, blue backlit
0 - 300 ms 0 - 300 ms
High and low shelving EQ High and low shelving EQ
2 x parametric EQ 2 x parametric EQ
Zero attack input limiter Zero attack input limiter
20 total presets, 19 user-definable 20 total presets, 19 user-definable
Low Pass L-R 24 dB/oct Low Pass L-R 24 dB/oct
Lock-out function for all settings Lock-out function for all settings
iQ15
Ultranet Digital Network
System
Signal 16 channels
Latency < 0.9 ms
Cabling
Cables Shielded CAT5
Cable length max. 246 ft / 75 m recommended
Power Supply
150 W @ / max power
Power consumption 1
8
Voltage (fuses)
USA / Canada 120 V~, 60 Hz (T 15 A H 250 V)
220-240 V~, 50/60 Hz
UK / Australia / Europe
(T 10 A H 250 V)
220-240 V~, 50/60 Hz
Korea / China
(T 10 A H 250 V)
Japan 100 V~, 50/60 Hz (T 15 A H 250 V)
Enclosure
711 x 450 x 381 mm
Dimensions HWD
(27.9 x 17.7 x 15.0")
Net weight 26.1 kg (57 lbs)
Injection-moulded polypropylene enclosure
Construction
Finish Black painted
Powder coated perforated steel
Grille
Flying hardware M10 x 3 points
Accessories
IQ15-WB Steel wall bracket
*independent of limiters and driver protection circuits
Quick Start Guide
iQ15B iQ18B
16 channels 16 channels
< 0.9 ms < 0.9 ms
Shielded CAT5 Shielded CAT5
max. 246 ft / 75 m recommended max. 246 ft / 75 m recommended
200 W @ / max power 200 W @ / max power
1 1
8 8
120 V~, 60 Hz (T 15 A H 250 V) 120 V~, 60 Hz (T 15 A H 250 V)
220-240 V~, 50/60 Hz 220-240 V~, 50/60 Hz
(T 10 A H 250 V) (T 10 A H 250 V)
220-240 V~, 50/60 Hz 220-240 V~, 50/60 Hz
(T 10 A H 250 V) (T 10 A H 250 V)
100 V~, 50/60 Hz (T 15 A H 250 V) 100 V~, 50/60 Hz (T 15 A H 250 V)
602 x 445 x 495 mm 691 x 533 x 559 mm
(23.7 x 17.5 x 19.5") (27.2 x 21.0 x 22.0")
30.6 kg (67 lbs) 39.8 kg (87.5 lbs)
Birch plywood, screwed, and glued Birch plywood, screwed, and glued
Black painted Black painted
Powder coated perforated steel Powder coated perforated steel
N/A N/A
73