Safety Information; Icons And Symbols; General Notes On Safety - Deltafox DG-CCS 1820 T Set Traducción Del Manual De Instrucciones Original

GB

Safety information

This section deals with the basic safety
regulations to be observed when working
with the machine.
An cordless pruner is a dangerous
device, which can cause serious or
even fatal injuries with incorrect or
careless use. Thus, for your own safe-
ty and the safety of others, you should
always take note of the instructions
on safety and, in case of difficulties,
consult a specialist for advice.

Icons and symbols

Symbols used on the device
1 2 3
8 9
1 Caution!
2 Read and take note of the operating
manual belonging to the machine!
3 Do not expose the machine to the
rain. Do not allow the equipment to
become damp or operate it in a damp
environment.
4 Danger due to materials blown out of
machine!
5 Keep the equipment away from near-
by people.
6 Remove the battery from the device
before maintaining the device.
7 Danger of death by electrocution!
Keep at least 10m away from power
lines.
8 Wear safety goggles or a safety mask
9 Wear a safety helmet.
64
4 5 6
10 11 12
10 Wear ear protection..
11 Wear cut-protection gloves.
12 Wear cut-protection safety boots with
anti-slip soles.
Machines do not belong with do-
mestic waste.
Information of the guaranteed
acoustic power level L
A full tank will last for approx.
15 minutes of continuous operation
Symbols used in the instructions
Hazard symbols with informa-
tion on prevention of personal
7 injury and property damage.
Precaution symbol with information
on prevention of harm / damage.
Notice symbol with information on
how to handle the device properly.

General notes on safety

Before you do any work with the
cordless pruner, make yourself
familiar with all operating parts.
Practise using the saw (sawing
logs on a sawhorse) and get an
experienced user or a specialist to
explain to you the function of the
saw, the way of working, the tech-
niques of sawing and the personal
protection equipment.
If an accident or fault occurs during
operation, immediately switch off
the device and disconnect at the
plug. Treat injuries appropriately or
consult a doctor. For the correction
in dB.
WA