We value your experience using Sunny Health and Fitness products. For assistance with parts or
8669).
STEP 3:
Loosen and pull out the T Shape Knob (No.
14) from the Main Frame (No. 1). Insert the
Handlebar Post (No. 25) to the front tube of
Main Frame (No. 1), then insert and secure
with T Shape Knob (No. 14) after adjusting to
proper height.
Note: Do not cut any wires when insert the
Handlebar Post (No. 25) to the Main Frame
(No. 1)
Attach the
Handlebar
Handlebar Post (No. 25) with 2 Bolts (No. 21)
and 2 Flat Washers (No. 22). Tighten and
secure using Allen Wrench (No. 81).
Attach the Meter (No. 16) to the bracket of
Handlebar (No. 26). Connect the Connecting
Wire (No. 86) and Pulse Wire (No. 20) to the
wires from the Meter (No. 16), then connect
the Sensor Wire (No. 13) to the Connecting
Wire (No. 86).
STEP 4:
Attach the Bottle Holder (No. 24) to the right
side of Main Frame (No. 1) and Dumbbell
Rack (No. 27) to the left side of Main Frame
(No. 1) with 4 Screws (No. 30) using Spanner
(No. 84).
The assembly is complete!
14
(No.
26) to the