Faq - THINK GIZMOS DINO HUNTER Manual De Usuario

Resetting the Dinosaur:
1. Carefully push the arms back into the sides of the Dinosaur.
2. Either press the button on the side of the Dinosaurs head or switch the on/off switch to
'off' and back to 'ON' to reset the position of the dinosaur and its legs.
Please Note: Do not forcibly pull or push the Dinosaurs legs into position as this will break
the legs. Press the button on the side of the dinosaurs head to reset.
3. The dinosaur is ready to go again.
Standby Mode:
To save battery power, if the on/off switch is left to 'on' and the dinosaur is not shot by the
Dino Gun the dinosaur will automatically enter sleep mode.
To activate the dinosaur press the button on the side of the dinosaurs head to restart.
Try Me Function:
When the 'ON'/'OFF' switch is moved to Try Me the dinosaur will make a noise, its eyes and
mouth will light and spray water (if there is water in the water tank).
The dinosaur will not walk and will not react to being shot with the Dino Gun.

2.5 FAQ

Question
The mouth lights up blue
but does not spray water.
The 'Arm Dropping' and
'Falling Down' functions
do not work.
Possible Reason
No water in the water
1.
tank.
Too much water in the
2.
water tank.
The atomizer in the
3.
mouth has large water
droplets on.
Not enough power to
•
function.
The Dino Gun is not
•
aimed at the correct
part.
The Dino Gun has low
•
batteries.
The dinosaur has low
•
batteries.
7
Solution
Add water to the water
1.
tank.
Reduce the water in the
2.
water tank.
Use a paper towel to
3.
suck up the water drop-
lets on the atomizer.
Replace the batteries in
•
the Dinosaur.
Aim the Dino Gun at
•
the sensor at the front
of the dinosaurs head.
Replace the batteries in
•
the Dino Gun.
Replace the batteries in
•
the Dinosaur.