Transport, Such As When Moving Out - Bosch Nexxt DLX Manual Del Usuario

Water drainage
CAUTION
Do not bend or pull the water
drainage hose.
Height difference between the
installation location of the washing
machine and the drainage point:
Maximum 8 feet / 244 cm.
Connecting the water
drainage hose
q Attach the drain hose to the
end of the drain connection.
q Secure the connection point
with the clamp and tighten.
Standpipe Installation
q Use the elbow. Attach the
elbow to the end of the hose
and insert end of hose into
standpipe.
q Use a strap or cable tie to hold
hose in place.
In-Wall Installation
q Use the elbow. Attach the
elbow to the end of the hose
and insert end of hose into wall
drain.
q Use a strap or cable tie to hold
hose in place.
Drainage into a siphon
Secure the connection point
q
with a hose clip(not included in
factory-supplied equipment).
Drainage into a sink
CAUTION
Ensure that the plug is not in the
drain hole.
q Attach water drain hose
securely to sink.
Use a strap or cable tie to hold
q
hose in place.
q When the water is being
drained, check that the water
flow out of the sink is adequate.
Transport, such as
when moving out
Before transporting the washing
machine:
- Turn off the water.
-
Disconnect the washing
machine from the power outlet.
- Dismantle the supply and
drainage hoses.
- Install the transport bolts.
i Having transported the
appliance and ensured proper
installation and connection,
allow the Drain program to run
through before starting the first
wash program.
Preparing and inserting the
transport bolts
q Remove the covers.
q Prepare the transport bolts:
Loosen the screw in the sleeve
until the end of the screw is
level with the end of the sleeve.
q Insert and tighten all transport
bolts. Make sure that the tab on
the transportation bolt is
inserted in the slot on the
washing machine back panel.
11