Parts / Tools
WARNING
• Mounting screws must be used. Failure to do so
can result in the oven falling out of the cabinet
and causing serious injury.
Parts Provided
4X14 6 Wood screws for mounting (4 needed
a
for installation and 2 extras)
4X24 6 Wood screws for mounting (for flush
b
installation)
4X22 2 Self-tapping screws for cover bracket
c
2 Cover brackets for flush installation
d
4X10 2 Screws for vent trim (Decor)
e
Vent trim (Decor)
f
Parts Not Provided
Junction box
a
Wire nuts
b
3/4" Conduit connector
c
36" (91 cm) String
d
Tools Needed
Phillips screwdriver
a
Flat-blade screwdriver
b
Tape measure
c
Pliers
d
Drill
e
Gloves
f
NOTE
• Observe all governing codes and ordinances.
• Have the installer show you the location of the
circuit breaker or fuse. Mark it for easy
reference.
• Be sure your appliance is installed and grounded
properly by a qualified installer or service
technician.
INSTALLATION
11