geberit AQUACLEAN SELA Manual Del Usuario página 30

EN
Testing the functions
Prerequisite
– The Geberit AquaClean Selais switched on.
1
Check the status of the storage water
heater: LED on control panel lights up blue,
storage water heater is set to user
recognition (economy mode) (factory
setting).
The spray nozzle is cleaned automatically
before and after each shower procedure.
2
Press the Shower button on the control
panel.
ü The spray arm extends and the shower
starts.
3
Increase or decrease the spray intensity by
pressing the <->/ <+>buttons.
30
All manuals and user guides at all-guides.com
4
5
Wait for 3 minutes, press the Shower button
again and check whether the shower water
is at body temperature.
ü All functions of the control panel have
been checked.
If the storage or transport temperature
exceeds 45 °C, the thermal cut-out will be
tripped.
If water is cold, reset thermal cut-out.
18014401309410443-1 © 11-2017
966.102.00.0 (06)