Locating A Particular Point In A Track - Sony SCD-555ES Manual De Instrucciones

Locating a Particular Point
in a Track Z
You can locate a particular point in a track during play or
play pause.
./>
INDEX>/.
Locating a point while monitoring the
sound (Search)
Press and hold m/M during play.
You will hear intermittent playback as the disc goes
forward or reverses.
When you reach the desired point, release the button.
Locating a point by observing the time
indication (High-Speed Search)
Press m/M during play pause.
You will not hear the playback sound.
z
When "Over!!" appears in the display
The disc has reached its end. Press . or m to go back.
Note
Tracks that are only a few seconds long may be too short for
monitoring. In this case, the player may not search correctly.
Locating a point using the index function
(Index Search)
Press INDEX. or INDEX> repeatedly in play or
pause mode.
z
What is an INDEX?
Some SACD or CD are provided with an index marking
system which divides tracks or discs into smaller segments.
This is especially useful when you want to locate a certain
point within a long track (in classical music for example). The
index search function works only when you use a
commercially available indexed discs (usually indicated on
the label).
Locating a point by setting the start time
(Time Search)
1. Press ./> to select the desired track in
stop mode.
2. Press m/M to set the time to start play while
looking at the display.
You can set the time from the beginning of the desired
track when you press M at first, and set the time from
m/M
the end of the desired track backward's when you press
m at first.
3. Press H.
Play will start at the time search.
SUPER AUDIO
CD
TRACK MIN SEC
5 2 . 5 7
1 2 3 4 5
6 7 8 9 10
16 17 18 19 20
15
GB