Ceiling Wall Mounting; Chain Suspension; Tube Suspension - Bromic Heating TUNGSTEN SMART-HEAT 2000W Manual Del Usuario

HEATER INSTALLATION
CONTINUED...
CEILING & WALL MOUNTING
CEILING & WALL MOUNTING
(1) Mark mounting hole centres on ceiling or wall.
1. Mark mounting hole centres on ceiling or wall.
(2) Attach mounting brackets to ceiling or wall
2. Attach mounting brackets to ceiling or wall using
using appropriate fasteners (Not supplied).
appropriate fasteners (Not supplied).
3. Bring heater up to mounting brackets and lock (3) Bring heater up to mounting brackets and lock
into position with M5x10 screw & nut. into position with M5x10 screw & nut.
4. Rotate heater to required angle. Lock into position
(4) Rotate heater to required angle.
with self tapping screw.
Lock into position with .
5. Make electrical connection from heater to power
supply.
(5) Make electrical connection from heater to
power supply.

CHAIN SUSPENSION

CHAIN SUSPENSION
(SOLD SEPARATELY)
(1) Heater must be installed with heater surface
2400mm above the floor level. If required, cut
1. Heater must be installed with heater surface
down length of chain to ensure correct
2400mm above the floor level. If required, cut
installation height.
down length of chain to ensure correct installation
height.
(2) Attach chains to heater with "S" hooks. Crimp
2. Attach chains to heater with "S" hooks. Crimp "S"
"S" hooks closed after assembly.
hooks closed after assembly.
(3) Prepare ceiling structure for heater. Attach
3. Prepare ceiling structure for heater. Attach chains
chains to ceiling structure & suspend heater. to ceiling structure & suspend heater.
4. Make electrical connection from heater to power
(4) Make electrical connection from heater to
supply. If required fix suply power cord to ceiling
power supply. If required fix suply power cord to
chain with cable ties.
ceiling chain with cable ties.
8
All manuals and user guides at all-guides.com
1
Mounting Hole Centres & Heater Position
2620212 (2000W) - 2620214 (4000W)
2000W & 4000W Models
611
3000W & 6000W Models
2620213 (3000W) - 2620215 (6000W)
904
www.bromicheating.com
HEATER INSTALLATION

TUBE SUSPENSION

TUBE SUSPENSION (SOLD SEPARATELY)
1. Mark mounting hole centres on ceiling. Attach
1. Mark mounting hole centres on ceiling.
Attach mounting brackets to ceiling using mounting brackets to ceiling using appropriate
appropriate fasteners (Not supplied).
fasteners (Not supplied).
2. Heater must be installed with heater surface at least
2400mm above the floor level. Supplied suspension
tubes position heater surface 1000mm below the
2. Heater must be installed with heater surface at least
2400mm above the floor level.
ceiling surface. If required, cut down length of
Supplied suspension tubes position heater surface
suspension tubes to ensure correct installation
1000mm below the ceiling surface.
height. Minimum distance from front surface of
If required, cut down length of suspension tubes to
heater to ceiling surface must be 250mm for 2000W
ensure correct installation height.
Minimum distance from front surface of heater to & 3000W models & 330mm for 4000W & 6000W
ceiling surface must be 250mm for 2000W & 3000W
2 models.
models & 330mm for 4000W & 6000W models.
4
3. If suspension tubes are cut down, drill new mounting
3. If suspension tubes are cut down, drill new mounting holes in each tube.
holes in each tube.
3
4. Make electrical connection in junction box as per
4. Make electrical connection in junction box as per
electrical installation instructions in this manual.
electrical installation instructions in this manual.
5. Feed power cord through suspension tube.
5. Feed power cord through suspension tube.
6. Assemble suspension tubes to rear bracket with M5
6. Assemble suspension tubes to rear bracket with M5 screw, spring washer and nut.
screw, spring washer and nut.
7. Rotate heater to required angle. 15° or 30° in either
direction. Lock into position with self tapping screw.
7. Rotate heater to required angle. 15° or 30° in either
direction. Lock into position with self tapping screw.
8. Raise heater assembly
suspension tubes to ceiling brackets with M5x35mm
3
8. Raise heater assembly into position.
screws, spring washers & nuts.
Attach suspension tubes to ceiling brackets with
M5x35mm screws, spring washers & nuts.
2
9. Make electrical connection from suspension tube
9. Make electrical connection from suspension tube
power cord to power from ceiling as per electrical
power cord to power from ceiling as per
installation instructions in this manual.
electrical installation instructions in this manual.
CONTINUED...
(SOLD SEPARATELY)
1 Mounting Hole Centres & Heater Position
2000W & 4000W Models
3000W & 6000W Models
into position. Attach
www.bromicheating.com
575
625
868
918
2
Suspension Tube
3
Mounting Hole
5
8
4
7
6
9
9