Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installing
Using the device as a desktop device
You can use the device as a desktop device. The shipment includes two self-adhesive rubber feet as
well as an attachable rubber strip, for this purpose.
Required material
● 2 self-adhesive rubber feet
● 1 attachable rubber strip
1. Stick the 2 rubber feet at the rear side on the housing base.
2. Stick the rubber strip on the front panel from underneath.
2.4 Establishing mains connection
Fig. 13:
Connecting the power supply cable
1. Make sure that the master switch is switched off.
2. Connect the mains cable to the mains connection socket of the unit.
3. Connect the plug on the mains cable into a suitable socket.
Connecting the power supply cable
Tabla de contenido
