Symbols Used; In The Documentation; Warning Notices - Structure And Meaning; Symbols In This Documentation - Bosch CRI/CRIN SST Instrucciones De Funcionamiento

1.

Symbols used

1.1

In the documentation

1.1.1

Warning notices - Structure and meaning

Warning notices warn of dangers to the user or
people in the vicinity. Warning notices also indicate
the consequences of the hazard as well as preventive
action. Warning notices have the following structure:
KEY WORD – Nature and source of hazard!
Warning
Consequences of hazard in the event of
symbol
failure to observe action and information
given.
¶
Hazard prevention action and
information.
The key word indicates the likelihood of occurrence
and the severity of the hazard in the event of non-
observance:
Key word Probability of
occurrence
DANGER Immediate
impending danger
WARNING Possible impending
danger
CAUTION Possible dangerous
situation
1.1.2

Symbols in this documentation

Symbol Designation Explanation
Attention Warns about possible property
!
damage.
Information Practical hints and other
i
useful information.
1. Multi-step Instruction consisting of several
2. operation steps.
One-step Instruction consisting of one step.
e
operation
Intermediate An instruction produces a visible

result intermediate result.
Final result There is a visible final result on
"
completion of the instruction.
1.2

On the product

!
Observe all warning notices on products and
ensure they remain legible.
Robert Bosch GmbH
Severity of danger if
instructions not observed
Death or severe injury
Death or severe injury
Minor injury
Symbols used | CRI/CRIN SST | 17 |
2.

User information

2.1 Important notes
Important information on copyright, liability and
warranty provisions, as well as on equipment users
and company obligations, can be found in the separate
manual "Important notes on and safety instructions
for Bosch Diesel Test Equipment". These instructions
must be carefully studied prior to start-up, connection
and operation of the CRI/CRIN SST and must always be
heeded.
2.2

Safety instructions

All the pertinent safety instructions can be found in
the separate manual "Important notes on and safety
instructions for Bosch Diesel Test Equipment". These
instructions must be carefully studied prior to start-
up, connection and operation of the CRI/CRIN SST
and must always be heeded.
2.3 Electromagnetic compatibility
(EMC)
The CRI/CRIN SST satisfies the requirements of the
EMC directive 2004/108/EG.
i
The CRI/CRIN SST is a class/category C2 product
as defined by 2004/108/EG. The CRI/CRIN SST may
cause high-frequency household interference (radio
interference) so that interference suppression
may be necessary. In such cases the user may be
required to take the appropriate action.
2.4

General information

These instructions describe the
set's design and way of operating.
These instructions are only valid in conjunction with
the instructions supplied for the:
R
Injection pump test bench EPS 815
R
Continuous-quantity-measurement system
KMA 802/822
R
Tester set CRS 845H
R
Tester set CRI/CRIN 848H
These instructions must be kept and distributed
together with the instructions listed above.
en
CRI/CRIN SST tester
|
1 689 989 098 2021-02-24