Tabla de contenido
G PLAY (MCS)
Status
Data Bytes
F0H
7FH, Dev, 06H, 02H
Byte
Description
F0H
Status of System Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (10H or 7FH)
06H
MMC Command Message
02H
PLAY (MCS)
F7H
EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the SP-
808EX goes into the playback condition.
G DEFERRED PLAY (MCS)
Status
Data Bytes
F0H
7FH, Dev, 06H, 03H
Byte
Description
F0H
Status of System Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (10H or 7FH)
06H
MMC Command Message
03H
DEFERRED PLAY (MCS)
F7H
EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the
SP-808EX goes into the playback condition after the locate operation.
G FAST FORWARD (MCS)
Status
Data Bytes
F0H
7FH, Dev, 06H, 03H
Byte
Description
F0H
Status of System Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (10H or 7FH)
06H
MMC Command Message
03H
DEFERRED PLAY (MCS)
F7H
EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the
SP-808EX goes into the fast forward condition.
G REWIND (MCS)
Status
Data Bytes
F0H
7FH, Dev, 06H, 05H
Byte
Description
F0H
Status of System Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (10H or 7FH)
06H
MMC Command Message
05H
REWIND (MCS)
F7H
EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the
SP-808EX goes into the rewind condition.
G RECORD STROBE
Status
Data Bytes
F0H
7FH, Dev, 06H, 06H
Byte
Description
F0H
Status of System Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (10H or 7FH)
06H
MMC Command Message
06H
RECORD STROBE
F7H
EOX (End of System Exclusive Message)
If the transport switch [REC] was pressed out of the recording condition, the SP-808EX
transmits as the device ID 7FH.
G RECORD EXIT
Status
Data Bytes
F0H
7FH, Dev, 06H, 07H
Status
F7H
Status
F7H
Status
F7H
Status
F7H
Status
F7H
Status
F7H
Byte
Description
F0H
Status of System Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (10H or 7FH)
06H
MMC Command Message
07H
RECORD EXIT
F7H
EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the
SP-808EX exits from the record condition.
G MMC RESET
Status
Data Bytes
F0H
7FH, Dev, 06H, 0DH
Byte
Description
F0H
Status of System Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (10H or 7FH)
06H
MMC Command Message
0DH
MMC RESET
F7H
EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the
SP-808EX resets all communication channels related with MMC.
G WRITE
Status
Data Bytes
F0H
7FH, Dev, 06H, 40H, ccH, ddH, eeH, ..., ffH, ...
Byte
Description
F0H
Status of System Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (10H or 7FH)
06H
MMC Command Message
40H
WRITE
ccH
Information Bytes follows the command
ddH
The name of the writable Information Field
eeH
Information Field Format
|
|
ffH
Field names and data
|
|
F7H
EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the
SP-808EX writes the data to the specified information field.
G MASKED WRITE
Status
Data Bytes
F0H
7FH, Dev, 06H, 41H, 04H, ddH, eeH, ffH, ggH
Byte
Description
F0H
Status of System Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (10H or 7FH)
06H
MMC Command Message
41H
MASKED WRITE
04H
Number of Bytes follows the command
ddH
The name of the masked type writable Information Field
eeH
Byte number to write in the Bit Map
ffH
Bit location of the bit map byte to change
ggH
New data to write to the specified bit map byte
F7H
EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the
SP-808EX writes the data to the specified bit map byte.
G LOCATE (MCP)
❍Format 1—LOCATE [I/F]
Status
Data Bytes
F0H
7FH, Dev, 06H, 44H, 02H, 00H, nnH
Byte
Description
F0H
Status of System Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (10H or 7FH)
06H
MMC Command Message
44H
LOCATE (MCP)
Apéndices
Status
F7H
Status
F7H
Status
F7H
Status
F7H
200
15
Tabla de contenido
