Global Mode; Program Change Mode - Akai Professional MPK61 Guia De Inicio Rapido

GLOBAL MODE

In Global Mode, you can send
global messages and make general
changes to the way that your
MPK61/MPK88 functions.
Mode options are organized under
different pages and include the list
of options shown below.
KILL MIDI
MIDI COMMON CHANNEL
LCD CONTRAST
KEYBOARD VELOCITY CURVE
PAD SENSITIVITY
PAD VELOCITY CURVE
PAD THRESHOLD
KEYBOARD TRANSPOSITION
MIDI CLOCK
TAP TEMPO AVERAGE
SAVE SETUP
SYSEX TX
VERSION

PROGRAM CHANGE MODE

A Program Change, often referred to as a
Patch Change, is a MIDI message used for
sending data to devices to cause them to
change to a new program. This allows you
to tell a hardware or software device which
sound to play. For example, if your
MPK61/MPK88 is controlling a piano patch
on your DAW or an external device, using a
Program Change command allows you to
easily switch to a synth patch.
There are two different types of Program Change messages on the MPK61/MPK88:
PROG CHANGE – This event will transmit a regular Program Change message (0-127) to your DAW or an
external device, allowing you to switch between 128 different program banks.
PROG+BANK – This event transmits a Program Change message (0-127), along with a Bank L (Least
Significant Bit) Change message (0-127) and a Bank M (Most Significant Bit) Change message (0-126),
which allows access of up to 16384 different program banks. You can use PROG+BANK if your DAW or
external device supports LSB and MSB.
All manuals and user guides at all-guides.com
1. Press the [GLOBAL] button.
Global 2. Use the [<] and [>] buttons to navigate through the available pages of
options (shown below).
3. Use the [VALUE] dial to change settings, values or select a message
on the selected page.
4. Press [ENTER] to accept the change or send a message or press [<]
Send an All Notes Off or Reset Controllers message
Select which MIDI channel will be used as the
Common Channel.
Adjust the contrast of the display.
Adjust how the keyboard will output MIDI velocity,
based on the force applied to the keys.
Adjust how sensitive the pads are to the touch.
Adjust how the pads will output MIDI velocity, based
on the force applied to them.
Adjust the threshold of minimum force required to
activate a pad.
Transpose the keyboard up or down in semitones.
Select Internal or External MIDI Clock source.
Select the number of taps to be averaged in
determining tempo.
Save the current global settings.
Transfer a Preset via SysEx.
Check the current firmware version.
NAVIGATING PROGRAM CHANGE MODE
1. Press the [PROGRAM CHANGE] button.
2. On Page 1, use the [VALUE] dial to select a Prog Change or
Prog+Bank message on and press [ENTER].
3. On Page 2, use the [<] and [>] buttons to move through the
different options and use the {VALUE] dial to change them.
4. Press [ENTER] to send the message.
11
NAVIGATING GLOBAL MODE
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13