Beko CEG 3192 B Manual De Instrucciones página 19

6
Cleaning
2
1
Press unlock area, sevice door will pop
out. Then pull out the service door.
When lights up, it indicates that the brewer is missing / installed improperly. When
flashing, it indicates that the service door is missing/installed improperly.
6.2 Self-Cleaning
WARNING: Please wait to finish the self-cleaning process and then switch off the machine.
When is flashing, it indicates that the appliance needs to undergo self-cleaning. The appliance
will remain in the best condition if this function is performed at least once a month or more regularly
depending on the hardness of water used. You should also
1. Fully fill the water tank.
2. Add one pack of cleaning agent included in the box to the water tank.
WARNING: Do not use vinegar or other cleaning agents for the self-cleaning of this
appliance. The cleaning agent might damage the appliance.
3. Plug in the appliance.
4. Place a sufficiently large container under the coffee spout and nozzle.
5. In standby, press and hold
with and the strong espresso button
6. Press the strong espresso button to confirm the self-cleaning process. To resume back to the
standby, press .
7. If it's flashing, that indicates that the appliance is self-cleaning.
Fully Automatic Coffee Machine / User Manual
Press release knobs and pull out.
and the strong espresso button
will flash.
Remove the brewer. Wash the brewer
with fresh water. Dry the brewer after-
wards.
for 5 seconds. You'll hear a beep
is
19 / EN