Combustion Air - Palazzetti INSERIMENTI A70 Manual De Instrucciones

Pi
X1
Set up the electricity supply line to arrive near the
appliance for the connection of the power cable.
62
Pi
X
Pp
Fig. 16

6.4 Combustion air

The appliance, during its operation, requires
combustion air.
The inflow of combustion air can be obtained
through an air intake outside the room itself (PA
= Air Intake).
Extraction of combustion air in the room
Create the air intake on the wall (Fig. 17 - PA=Air
Intake), and leave the appliance to withdraw the
room air, making sure to connect the section of
corrugated pipe on the air inlet pipe, if supplied,
fixing it with the tie and folding it slightly down-
wards to prevent any resonance effects.
It is possible to use a rear combustion air pipe
to the machine with a pipe diameter of 80 mm,
max length 4 m. equivalent for external direct
connection.
PA
Fig. 17
004778740 - 14/06/2021