Advanced Setup - Fermax SIP Manual De Instalador

SIP P SIP P ANEL ANEL
SIP P SIP P SIP PANEL ANEL ANEL
SIP P SIP P ANEL ANEL
SIP P SIP P SIP PANEL ANEL ANEL

ADVANCED SETUP

Access Control
DTMF Configuration
The user can configure the DTMF codes that will be sent to the other end in order to
indicate the activation of the panel relays.
A DTMF code is a combination of tones that we can send through the keypad when
the communication between the panel and the SIP device is established.
This section allows to configure the DTMF code that the remote device will send in
order to activate each of the relays.
You can also deactivate this option by unmarking the checkbox "Open port from
DTMF".
Network Setup
Here, the user can configure all the data needed to connect to the SIP server.
This allows you to indicate if the panel must obtain the IP dynamically via DHCP or if they
want to assign them manually. If you select the "DHCP Mode" option the panel will use the
client DHCP to obtain the IP address. If you select the "Static IP Mode" option the user can
manually enter the IP in the following fields:
• MAC address: Read-only field that shows the MAC.
• IP address: Address on the IP Panel. (The default IP is 10.100.0.1)
• Subnet mask: Panel network mask.
• Default gateway: Default gateway.
Internet call settings (SIP Configuration)
Here the user can configure all necessary data to connect to the SIP server.
• SIP server: Hostname or server IP Address. This server must be on the same network
or be accessible from the panel
• User
2 /Password: The username and password that the panel must use to authenticate
itself on the SIP server.
• Realm: Specific environment of the SIP server, if applied.
• Domain: SIP domain associated to a group.
• Connection status (See
connection status with the SIP server. The status refreshes periodically while on this
page.
o
o
o
Note 1 : Do not use SIP notation to fill in the fields, for example "sip://" or sip://ext@domain,
just the IP address, or the hostname.
2
Note : The number in the "User" field will be the panel extension.
1
3
on the screen): Via a traffic light type icon, it indicates the
Red: not connected
Yellow: in connection process
Green: connected
Pag 9