Call Establishment; Auto-On; Opening Doors; Lynx Sip Web Configuration - Fermax SIP Manual De Instalador

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

SIP P
SIP P
ANEL
ANEL
SIP P
SIP P
SIP PANEL
ANEL
ANEL
SIP P
SIP P
ANEL
ANEL
SIP P
SIP PANEL
SIP P
ANEL
ANEL
2. FUNCIONTIONALITY

2.1 CALL ESTABLISHMENT

Pushing the button on the panel will make a call to the extension assigned, (see section
2.4 for how to set-up the extension assignation).
If the call is answered, an audio and video
device.
The call is maintained until the remote device hangs up or the timeout
Note
1
: If the remote device has not capability to play video, the connection is established
just with audio.

2.2 AUTO-ON

In order to use the auto-on capability, any device in the network can dial the panel extension,
(see section 2.4 to see how to configure the panel extension). When this occurs, the panel
auto-answers the call, activates the camera and the microphone and starts a conversation.
If the device hangs up or the timeout
As well as a standard call, if the device has not videocamera, the connection is established
just with audio.
Note
2
: Auto-on maximum duration: 90 seconds.

2.3 OPENING DOORS

During a communication, the remote device can send the panel commands to:
- Open the door.
- Activate the second relay.
As these commands are different depending on the VoIP devices manufacturer, our system
is open to integrate with any of them. In order to do so, the commands can be configurable
via the web server.

2.4 LYNX SIP WEB CONFIGURATION

The web configuration interface is the same as for a Lynx Villa panel, except for the
following options shown in the "Basic Setup" and "Advanced Setup" tabs that are particular
to SIP server settings.
- Pushbutton Settings
- SIP Settings
- DTMF Configuration
The following screens show the web server of the SIP panel:
• User: admin
• Password: admin
Important notice: After performing a firmware update on the SIP panel and before
entering the login on the Web server, the browser's cache must be cleared.
1
communication will be open with the remote
2
is reached, the communication ends.
2
is reached.
Pag 5

Capítulos

Tabla de contenido
loading

Tabla de contenido