Overall Cleaning; Cleaning Of Door Tray - Bertazzoni REF36FDFIXNV Instrucciones De Instalacion Y Uso

4. Maintenance and care of the appliance

4.1 Overall cleaning

Dust on the condensor coil, behind the refrigerator and on the ground below the refrigerator shall be
cleaned periodically to improve the cooling efficiency shall be timely cleaned to improve the cooling
effect and energy saving. The interior of the refrigerator should be cleaned regularly to avoid odor. Soft
towels or sponge dipped in water and non-corrosive neutral detergents are suggested for cleaning. The
freezer of shall be finally cleaned with clean water and dry cloth. Open the door for natural drying before
the power is turned on.
Do not use hard brushes, clean steel balls, wire brushes, abrasives,
such as toothpastes, organic solvents (such as alcohol, acetone,
banana oil, etc.), boiling water, acid or alkaline items clean
refrigerator considering that this may damage the fridge surface
and interior.
Do not rinse with water so that the electrical insulation properties are
affected.
Please unplug the refrigerator for defrost and cleaning.
4.2 Cleaning of door tray
(The picture above is only for reference.The actual configuration will depend on the physical
product or statement by the distributor)
According to the direction arrow in the figure below, use both hands to squeeze the tray, and push
it upward, then remove.
After washing the removed tray, you can adjust its installing height in accordance with your needs.
14