Changing The Light; Starting; Energy Saving Tips - Bertazzoni REF36FDFIXNV Instrucciones De Instalacion Y Uso

2.3 Changing the Light

Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer, its
service agent or similar qualified person.

2.4 Starting

35" 7/8
135°°
64" 3/8

2.5 Energy saving tips

The appliance should be located in the coolest area of the room, away from heat producing
appliances or heating ducts, and out of the direct sunlight.
Let hot foods cool to room temperature before placing in the appliance.
appliance forces the compressor to run longer. Foods that freeze too slowly may lose quality, or
spoil.
Be sure to wrap foods properly, and wipe containers dry before placing them in the
appliance.This cuts down on frost build-up inside the appliance.
Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling.
Liners interfere with cold air circulation, making the appliance less efficient.
Organize and label food to reduce door openings and extended searches. Remove as many
items as needed at one time, and close the door as soon as possible.
Before initial start, keep the refrigerator still for two hours before connecting it to
power supply.
Before putting any fresh or frozen foods, the refrigerator shall have
run for 2-3 hours, or for above 4 hours in summer when the ambient
temperature is high.
Make sure there is adequate space for the installation of the
appliance, otherwise the doors and drawers may not open fully.
8
Overloading the