Stihl FS 300 Manual De Instrucciones página 65

10 Fitting the Harness
Shoulder strap
2
We recommend using a full harness for this
machine, because of its weight and for ergo‐
nomic reasons.
Full harness
2
0458-579-8721-B
1
3
1
4
3
The full harness is supplied together with an
information sheet showing how to fit it.
10.1 Fitting the harness
► Put on the harness (1)
► Adjust the strap length so that the snap
hook (2) is approximately a hand's breadth
below the right hip.
► Attach the snap hook (2) to the perforated
strip (3) on the machine – refer to next chapter
'Connecting machine to harness'.
► Balance the machine – refer to chapter 'Bal‐
ancing the machine'.
Trim excess strap lengths at the ends after
adjusting.
10.2 Connecting machine to har‐
ness
1
2
The type and functioning of the snap hooks may
vary.
► Hook the snap hook (1) into the perforated
strip (2) on the drive tube
English
2
1
2
1
65