Stihl FS 300 Manual De Instrucciones página 62

English
► Block the shaft
► Screw nut (4) counterclockwise onto shaft and
tighten.
WARNING
Nuts that move too easily must be replaced.
NOTICE
Remove the tool used to block the shaft.
7.11.4 Removing the cutting attachment
► Block the shaft
► Unscrew the nut clockwise
► Remove cutting attachment and its mounting
hardware from the gearbox
7.12 Shredder blade 270-2
7.12.1 Mounting the cutting attachment
► Attach guard ring for mowing applications
4
2
b
b
a
► Fit shredder blade (1). The cutting edges must
face upward
WARNING
Collar (a) must engage the hole (b) in the cutting
attachment!
7.12.2 Securing the cutting attachment
► Fit the thrust washer (2) – curvature faces
upward
62
3 3
1
7 Mounting the Cutting Attachment
► Fit guard ring (3)
► Block the shaft
► Screw nut (4) counterclockwise onto shaft and
tighten.
WARNING
Nuts that move too easily must be replaced.
NOTICE
Remove the tool used to block the shaft.
7.12.3 Removing the cutting attachment
► Block the shaft
► Unscrew the nut clockwise
► Remove cutting attachment and its mounting
hardware from the gearbox
7.13 Circular saw blades 200 and
225
7.13.1 Position cutting attachment
With grass cutting blades, the cutting edges must
face clockwise.
7.13.2 Mounting the cutting attachment
► Attach guard ring for sawing applications
0458-579-8721-B