Double Hose And Spray Gun (Aircoat) - WAGNER SUPER FINISH 17EX Manual De Instrucciones

GB
STARTUP
4.3

DOUBLE HOSE AND SPRAY GUN (AIRCOAT)

1. Mount the AirCoat regulator (11) to the SF 17 EX.
2. Fit the ball valve (15).
Make sure that you do not confuse the con-
nections for the material hose and air hose
on the gun and the device.
3. Mount the air hose (12) that is part of the double hose to
the AirCoat regulator (11).
4. Screw the other end of the air hose (12) to the air entry
point of the gun.
5. Screw the material hose (13) that is part of the double
hose to the material hose connection (14).
6. Screw the other end of the material hose (13) to the mate-
rial entry point of the gun.
7. Tighten all the sleeve nuts on the hoses.
When screwing the high pressure hose to the
hose connection, counter with the 19 mm
wrench.
8. Mount the required nozzle. (See also the instructions for
the spray guns).
40
15
14
11
Super Finish 17ex
11
12
13