Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SAFETY WARNING
Working safely with this tool is possible only when the operating and safety information are read
completely and the instructions contained therein are strictly followed. The manual shall be kept in a
known location and be easily accessible for operators and maintenance staff for the life of the
product. Always wear personal protective equipment as protective clothing, mask, gloves, helmet,
shoes etc. Concentrate your attention on the work. Bear the potential risk of accidents in mind to
ensure that they do not happen. Use your common sense and do not work the machine if you are ill or
tired or under the influence of alcohol or drugs. All operation shall be carried by qualified person with
experience.
• Before each use, check the unit for full functional capability. If the functional capability is not
ensured or if damage is detected, STOP USE the compressor immediately. Contact your dealer!
• Do not make any construction changes to the unit.
• Use only suitable jaws for the springs. Ensure that the spring is positioned correctly in the jaw. The
centre line of the spring must be centered in both jaws.
• When compressing the spring, the spring windings should not come in contact with each other.
• Use air wrench only with the supplied torque stick which has a torque limit of max. 40 Nm.
• Air wrench torque limit 40 Nm. We recommend using an air ratchet.
• Pay attention to compressed spring. Never drop or impact compressed spring, can cause serious
injury.
• Use only for spring types mentioned in the user instructions.
• Keep the workplace clean and tidy at all times.
• Concentrate your attention on the work. Bear the potential risk of accidents in mind to ensure that
they do not happen. Use your common sense and do not work the machine if you are ill or tired or
under the influence of alcohol or drugs.
• Do not use the compressor for other purposes than it was designed for and DO NOT OVERLOAD
the compressor.
• Before and during the clamping process as well as after each operation, make sure that the spring
is correctly located in the compressor.
• Do not lean over the compressor when in use to make sure that even in the case of an accident,
the spring will not impact on user.
• Do not leave the spring compressor unattended.
• For indoor use and room temperature only.
• Store this product in dry place. NOT in moist or corrosion place.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Tabla de contenido
