Tabla de contenido
Idiomas disponibles
Idiomas disponibles
COMPONENTS
1. Spindle Nut
2. Removing Disc
3. Removing Sleeve
4. Mounting Disc, large
5. Mounting Disc, small
6. Spindle
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This Rear Axle Bush Tool is designed for extraction and replacement of bushes directly on car without
removing the rear carrier assembly and is suitable for BMW X5 (E53).
SAFETY INFORMATIONS
•
Keep children and unauthorised persons away from the work area.
Do not let any children play with the tool or its packaging.
•
Make sure that the work area is sufficiently illuminated.
•
•
Keep the work area clean, organised, dry and free from other materials.
Do allow untrained persons work with this tool set.
•
Lifting of vehicles only allowed on the special lifting points.
•
Before starting work under a car always ensure that it is adequately supported by axle stands
•
or ramps. Chock wheels and ensure that the hand brake is firmly applied.
Always use approved eye protection, especially when working under vehicles.
•
•
Ensure a secure and well-gripped stance during fitting.
Ensure that tools are correctly mounted.
•
Regularly check the condition of the tool and replace the damaged parts.
•
•
Do not over tighten or use undue force as this can cause damage to both tool and component.
The tool is not suitable for air impact wrenches. The use of an air impact wrench may lead to
•
the spindle bearing or other components bursting and fragments of components flying around
may lead to injuries.
Always use workshop manual for detailed instructions.
•
Always lubricate the screw threads before using the tool.
•
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Rear Axle Bush Tool | for BMW X 5
Tel.: 02196 720480
Fax.: 02196 7204820
BGS 8845
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Tabla de contenido
